Achieve Immaculate Surfaces with Resincoat Cement, Grout & Salt Residue Remover
Revitalise your home effortlessly with Resincoat's Cement, Grout & Salt Residue Remover. Designed for both DIY enthusiasts and professionals, this powerful formula effectively dissolves stubborn residues without compromising the integrity of delicate surfaces like porcelain, ceramic, and natural stone. Ideal for indoor and outdoor use, it simplifies cleaning routines, saving time and effort while delivering professional-quality results. Trusted by experts for its gentle yet effective action, Resincoat's remover ensures your surfaces shine with renewed brilliance, making it a must-have for any home renovation or maintenance project.
Coverage Guide
See below approximate coverage for 5 litres.
Mild cases: 125m²
Severe cases: 75m²
Extremely severe cases: 25m²
Application Guide
Preparation:
Ensure the surface is clean and free of loose debris. For mild cases or non-absorbent surfaces, dilute 1 part Cement, Grout & Salt Residue Remover with 4 parts cool water.
Application:
1. Dilute the remover as per severity: mild (1:4), moderate (1:1), severe (undiluted).
2. Apply evenly using a light pressure sprayer or watering can.
3. Keep surfaces wet with the solution for up to 30 minutes; reapply if drying occurs.
4. Scrub using a deck brush, nylon scrubbing pad, or rotary scrubbing machine.
5. Rinse thoroughly with water after scrubbing.
6. For severe cases, agitate immediately and leave for 5-10 minutes before scrubbing again.
7. For extremely severe cases, apply undiluted, agitate, and immediately extract using a sponge or wet vac.
8. Always rinse surfaces thoroughly with cool, clean water after treatment.
Useful Information
- Avoid using on highly polished surfaces such as polished marble, polished travertine, or polished limestone.
- Rinse any contaminated surface immediately with plenty of clean water.
- Do not apply when surfaces are extremely cold or hot; ideally, apply between 5°C to 25°C for best results.
