Resincoat Paving & Patio Sealer: Repel Stains, Beautify Your Patio

Elevate your outdoor surfaces with Resincoat Paving & Patio Sealer, a premium water-based solution designed for DIY enthusiasts and professionals alike. This innovative sealer enhances the natural allure of stone and concrete, while providing robust protection against water, oil, and grease stains. Engineered to reduce efflorescence and promote surface breathability, it caters to a variety of stone finishes including honed, rough-cut, flamed, and brushed. Whether revitalizing a patio or embarking on a new project, Resincoat ensures professional-quality results with ease, making it the go-to choice for transforming your outdoor oasis.

Coverage Guide

Please see below approximate coverage rates per 5 litre bottle.

Honed surfaces - 150m²

Medium porosity surfaces -  75m²

High porosity surfaces - 37.5m²

Application Guide

Preparation:

Ensure the surface to be treated is completely clean, dry, and free from dirt, grime, cement, and grout residues. Wash surfaces thoroughly with water and a nylon scrubbing pad or deck brush to remove any debris. Rinse well with water using a hose to remove any released residues, and allow the surface to dry completely for 24 hours before applying Resincoat Paving & Patio Sealer.

Application:

1. Shake the bottle of Resincoat Paving & Patio Sealer well before use.

2. Apply evenly using a foam roller, paint brush, or light pressure sprayer.

3. For more absorbent surfaces, apply additional coats at hourly intervals until fully saturated.

4. On vertical surfaces, start from the bottom and work upwards, wiping up any drips immediately.

5. Apply between temperatures of 5°C to 25°C and avoid extreme hot or cold conditions.

6. Always test on a small area before full application to determine optimal number of coats.

INS033

Specific References

ean13
5056489496228

Download

16 other products in the same category:

Comments (0)