£23.33 ex VAT.
Resincoat Etch and Clean is the easy way to prepare and clean your concrete floor before painting or resurfacing.
This product can be used on brick and concrete surfaces to remove laitance and neutralize alkalinity in new concretes (concretes must be at least 1 month old).
Resincoat Etch and Clean is the premier cleaning formula for preparing and cleaning concrete before applying epoxy paints or resurfacing products. The formula will change colour to indicate neutralisation allowing you to maximise the bond between your floor and paint products. Etch and Clean is ideal for preparing new floors, removing all laitance and providing a great foundation for other products.
A 5 Litre container should cover 15-20m² if applied correctly. Guarantees of this, however, cannot be given due to varying porosity of different surfaces.
1. Decant product in to a watering can or similar and apply evenly to your surface in a circular motion.
2. The etcher will froth as it hits the surface, this is the acid base reacting with the alkaline and helping to remove any contaminants, keying your surface in the process.
3. Scrub the surface with a stiff broom. If you have a large area you may require a scrubbing machine.
4. When the frothing stops, clean your surface thoroughly with water.
5. Leave surface to completely dry before coating with any Resincoat product.
• Please note: If the Etch and Clean does not begin frothing when it meets the concrete, this may mean the surface is sealed and would need to be lightly abraded to create a key. If you have a smooth concrete and finding the Etch and Clean is not frothing, the suggests the etcher may not be able to penetrate.
• IMPORTANT: Etch and Clean is a hydrochloric acid and, as such, would make any soil it comes into contact with acidic. Not all plants thrive in an acidic environment.
Data sheet
Specific References
Resincoat Etch and Clean is the easy way to prepare and clean your concrete floor before painting or resurfacing.
This product can be used on brick and concrete surfaces to remove laitance and neutralize alkalinity in new concretes (concretes must be at least 1 month old).
Resincoat Floor Degreaser is a versatile, hard floor cleaner and degreaser suitable for preparing oil or grease contaminated concrete floors for subsequent floor paints. Simply mix with water to required dilution and the highly concentrated degreaser will rapidly break down all tough grease, oil, petrol and dirt.
Resincoat Cleaning Fluid is a safe, low-VOC solvented cleaning fluid for Epoxy Floors that have oil, grease or tyre marks.
Portwest Professional Cleaning Wipes are ideal for cleaning hands, tools and surfaces during the application of resin products. The wipes will remove wet paints and primers much more effectively than soap and water. They are also a great safe alternative to white spirits.
Keep out of reach of children. Do not use on broken or damaged skin. Finish with a dry cloth for best results.
Will not remove cured resins or paints. Will not clean fibre brush heads or roller sleeves.
Resincoat PPE Safety Pack is designed for wearing whilst applying epoxy paints and other resin based products that could be harmful if in contact with skin. The pack includes a high quality 'one size fits all' elasticated coverall suit, valved disposable face mask, safety glasses, corded ear plugs and disposable nitrile gloves.
Resincoat Universal Floor Cleaner is a low foaming neutral pH cleaning fluid, ideal for use in floor scrubbing machines or manual cleaning.
Formula contains waxes to produce a glossy appearance with added protection.
