Availability: 48547 In Stock
Paint Mixing Paddle
This medium duty mixing paddle is capable of mixing paint, coatings, sealers and light mortars.
Chemical Resistant Bund Sealer
£76.99
£64.16 ex VAT.
Tax included
Resincoat Chemical Resistant Bund Sealer is a heavy duty polyurethane coating for use on bund walls and areas where excellent chemical resistance and a leak-proof seal are essential. This paint can achieve a waterproof seal with just one coat and has excellent damp proof properties.
-
Easy to apply, two part formula
-
Excellent chemical resistance to oils, acids, alkalis, solvents and more.
-
Ideal for use on bund walls, tanks and pipes.
-
Suitable for internal and external use
DESCRIPTION
Resincoat Chemical Resistant Bund Sealer is perfect for use in chemical plants, boiler rooms and various other applications where a waterproof seal with chemical properties is a top priority. The formula is a two-part epoxy which will adhere to many types of substrate including metals, concrete and wood. This product will protect against spillages from a wide range of chemicals including oils, petrols, diesel, acids, alkalis and more. By creating a waterproof seal and a long-lasting damp proof effect, this product is also great for sealing cracks and joints in damaged concretes.
COVERAGE RATES
Please see below for coverage rates. If you are coating a large area and would like expert advice, please call our team who will be happy to assist you.
1kg: up to 3m²
2.5kg: up to 7-8m²
5kg: up to 15m²
10kg: up to 30m²
Please note: the above coverage rates are per coat, in most cases we advise 2 coats and is dependant on the porosity of the surface.
APPLICATION GUIDE
Preparation
Old paint finishes should be removed if flaking at all and the surface should be sanded to create a texture (also known as a mechanical key) prior to applying Resincoat Chemical Resistant Bund Sealer. After the surface has been completely abraded, thoroughly sweep and vacuum the area of any remaining dust or contaminants. For more information on preparation, please see technical data sheet.
Priming
• For new concrete floors or floors in good condition, prime with Resincoat Damp Tolerant Primer
• For dusty, old or weaker floors prime with Resincoat Deep Penetrating Primer
• For greasy floors with heavy oil residue clean thoroughly using a suitable degreaser scraping off any dust or dirt and then prime with Resincoat Oil Tolerant Primer
Application
We advise when applying this product the ambient temperature is at least 7°C.
1. Mix Part A on its own with a mixing paddle, attached to an electric drill, for about 1 minute. Once mixed, adding ALL of Part B and continue to mix for another 90 seconds, keeping the paddle in suspension to avoid mixing air into the unit.
2. Pour entirety of the tin's contents into a plastic paint scuttle or tray.
3. Immediately begin applying your paint with a nylon-bonded resin suitable roller.
4. Use a brush around the edges to cut in (a second pair of hands can be useful for this stage).
5. As soon as the first coat has started curing (is no longer tacky to touch) you can re-coat; this should take 12-24 hours.
6. The cured final coat is ok for foot traffic. Heavy objects, however, should be left off the new coating for the first 48 hours and chemicals including water should not be introduced for the first 7 days (Full chemical cure).
PLEASE NOTE: The pot life of this product is 20 minutes. This means that once parts have been mixed, the paint will start to chemically cure after this time. Ensure you remove the paint from the tin in this window. The paint will then be workable on your floor for up to 40 minutes.
Pot life = Time to harden in pot following addition of hardener
Working Time = Time to apply product before it becomes unworkable
USEFUL INFORMATION
• Roller sleeves should be used once per coat, two coats will require two roller sleeves.
• This product should NOT be split. Taking smaller quantities from each tin, even if measured correctly, may cause issues with activating.
• This product is NOT self levelling.
WLC104
Data sheet
- Appearance
- Gloss
- Composition
- Smooth Polyurethane Finish With Great Chemical And Liquid Resistance
- Substrates
- Bare Concrete, Wood, Screeds, Steel
- Product Components
- Resin (Part A) + Activator (Part B)
- Typical Installations
- Bund walls, water tank paint, waterproofing, damp proofing
- Re-coat/Foot-traffic Time (at 20°C)
- 8-12 Hours
- Drying Time (at 20°C)
- 12-24 Hours
- Pot Life
- The Pot Life Of This Product Is 20 Minutes
- Application Tools
- Roller
Specific References
- ean13
- 5004611044762
- upc
- 500885048000
Resincoat Chemical Resistant Bund Sealer is a heavy duty polyurethane coating for use on bund walls and areas where excellent chemical resistance and a leak-proof seal are essential. This paint can achieve a waterproof seal with just one coat and has excellent damp proof properties.
-
Easy to apply, two part formula
-
Excellent chemical resistance to oils, acids, alkalis, solvents and more.
-
Ideal for use on bund walls, tanks and pipes.
-
Suitable for internal and external use
Frequently Bought Together
Availability: 47861 In Stock
Resincoat 2" brushes are often essential for coating application. These brushes are excellent for cutting in around intricate areas and can be used effectively when line marking or painting stairs. The paint brush offers versatility in areas which are not easily accessed when using a nylon roller. They allow careful application and neat edging as well as aiding close control of the coating thickness.
- Excellent for cutting in
- Neat edging
- Close control of thickness
- Ideal for use with epoxy coatings
Availability: 4078 In Stock
Resincoat Epoxy Resin Roller Sleeve is expertly crafted from thermo-bonded nylon & stands resilient against chemicals that typically harm roller sleeves. It's the ideal choice for projects involving solvent-based materials and 2-component paints, such as our epoxy and polyurethane resins. With precision application, exceptional durability, and compatibility with our own resin products, this versatile roller sleeve ensures professional-quality results, always.
- Chemical resistant
- Durable thermo-bonded nylon
- Precision application
- Ideal for use with epoxy coatings
Availability: 47965 In Stock
Reusable 12 inch roller cage for floor paint and sealer application. To be used with a standard mop handle, not included with this product.
Comments (4)
Reviews